Friday, 15 February 2013

DIY On Demand Feeder

Last week, during Chinese New Year, I had to visit my hometown in Malacca for 5 days. Feeling worried that my fish will starve (perhaps even die) during the holidays, I quickly made a simple on-demand fish feeder out of materials available in my house before I begin my trip. The design is based on several DIY videos I found on youtube and some aquaculture PDF files that can be googled.

Though my design was based on the commonly used pendulum demand fish feeder, the food release mechanism works differently. The usual design requires the pendulum rod to be extended below the surface of the water so that the fish can activate the food release mechanism by bumping the rod. The problem is that my rod is made from iron and is slightly galvanized. Since I can't have the rod touching the water, I tied a string to the end of the rod and attached a ball of cotton rope at the bottom end of the string which floats on the surface acting as bait. When a fish bites and pulls the bait, the whole feeder shakes, releasing some pellets in to the water. Once the feeder was set up, I left my house with my fingers crossed in hopes that my tilapia will soon learn how to use it.

When I returned home, 5 days later, I found the feeder empty. The fish seemed happy, but I wasn't sure if the fish had learned how to use it yet. I refilled the feeder and stood in front of the tank for 30 minutes to see how the fish "use" it. Most fish just nibble or "kiss" the bait but occasionally a clever fish (perhaps just hungry for a bite) will pull and jerk it hard enough to release enough pellets to feed several fish. The feeder works!

The way my feeder works is by taking advantage of tilapia's feeding behavior. When they feel hungry, they will start nibbling on anything they can find. The ball of white cotton rope with its hairy cotton strands looks attractive (at least to me) to them. Pulling the bait hard will shake the feeder which releases pellets in to the water where the fish can snack on. When the tilapias are full, they are less likely to nibble the bait. This way, feeding times will be much more regular which I hope will increase their growth rate and also provide less stress to the filtration system.


Hopper made out of mineral water bottle.
The disc is made out of a piece of thick paper with a bottle cap below it secured by rubber band.
Bait made out of a white cotton rope.

As usual, I will also include several photos of the plants...

Plants

Tomato (12" tall).
Bok Choy seems to be having iron deficiency.
Red Okra having problems standing upright due to the recent rain.
Roselle cuttings at the left and flowering kang kong plant at the right.
Fruiting chilli plant.




Thanks for reading!

:-D

Saturday, 2 February 2013

Trapping a Thief

The Thief

Recently, a creature had been stealing my tilapia food. It made a big hole through the cover to gain access. I wasn't sure what it was but all i know is it has strong teeth. I suspect it must be the same squirrel as before.

The hole at the top chewed out by the creature
So, I planned to give it a surprise by cleverly modifying the food container into a trap. I removed all the fish food, and filled the container half way with water. I then soak several plastic bags and a big piece of saran wrap inside the water to give the creature something buoyant to stand on but not rigid enough to allow it to jump out. Once the trap is set, I left it alone for a day.

This morning, to my surprise, the victim was a rat. I was expecting a squirrel. There, it couldn't jump out.

The rat; resting on the plastic bag
The plastic bag provides enough buoyancy for it to stick its nose above the surface while sitting
I released it and hoped that it learns not to come here again. There was a lot of rat poop in the water and it smells like rat. Need to wash the container... ( =_=) viruses... and bacteria...


The Plants

And now, about the plants. The plants...
I found something interesting about kangkong plant. It is very tough. It doesn't give up easily. Last week, when I was clearing the left growbed, I removed all but the top most kangkong vines that were creeping on the PVC shade. The vines, without its roots, soon dries out. But to my surprise, it bloom new flowers!

Dried kangkong vines hanging at the top of the shade
A single white flower (smaller than usual) and several new flower buds at the bottom (not shown)
My tomato and pak choy seedlings are doing well under the new morning brightness. The pruned kang kong is regrowing its shoots very fast. As for the chilli plant, it is going crazy growing new shoots since getting exposed to direct sunlight.

Tomato, pak choy, and kang kong seedlings
Mutant tomato seedling. It remained at the cotyledon stage without growing true leaves.
Centre: Kang kong growing new shoots. Left: Roselle cuttings bought from the market
Chilli plant. The left shoot is growing very fast.
I'm not sure what variety it is. This plant was given to me by a friend. I do not know what is their harvest size.
Another fruit but this one is curled.

Thanks for reading! :-D

Thursday, 24 January 2013

Renewed Energy!

I'm back!

Had been months since my last update. I didn't feel like updating my blog for so long because many of my plants were dying due to the lack of direct sunlight at the back of my house. My plants became sick and weak, and turned into easy targets for various bugs and fungi. The lack of plant growth leads to the accumulation of nitrates. To counter that, I reduced feeding rates of the fish to the point of stunting their growth. All these failures had drained my aquaponics motivation level so much that I had neglected my maintenance duties other than feeding the fish.

But then, good news came! Last week, after months of lodging complaints and sending letter to my residential management office, they finally decided to prune that big tree behind my house. Finally, my grow bed gets to be bathed by direct sunlight! The back looks brighter now; I was joyful and I smiled...

Here are some pics:

The tree after much of its major branches removed. I'm sorry tree, but you need to slim down.
Right grow bed: Mostly weeds, dead genovese basil, and dying okra.
Left grow bed: Hundreds of tree saplings, a chilli plant, kang kong, and one surviving japanese cucumber.
This is the one and only cucumber plant that survived. Unfortunately, the main stem at the bottom broke when a tree branch fell on my system while pruning the tree. It only bore one fruit.
To reach for more sunlight, this kangkong had turned viney. It is producing lots of seeds though.
Tilapia tank.
I tried to get a full view shot, but there's a wall behind me.
Chilli fruit.
My favourite harvest, the single cucumber fruit before the plant died.

With my spirits lifted, I proceeded to clear the right grow bed for new tenants. Here's a good chance to show you some of the red wrigglers that has been living in the beds for some time.

Cleaned grow bed.
Can you see them?
Here's another pic... See any worms?

I then bought a new batch of seeds. They are: Kai Lan, Aster Pink, Red Okra, Pak Choy, Coriander, and Tomato.


 Thanks for reading!
:-D

Wednesday, 10 October 2012

PVC Aquaponics Shade

3 weeks ago, I started building a shade for my aquaponics system to protect the plants from strong winds and heavy rain. As I am living in a gated townhouse, I am not allowed to make modifications to my veranda and bordering walls. Therefore, the criterias for my shade design are:
  • cheap as possible
  • no drilling/nailing on existing walls and roofs
  • does not extend beyond the borders of my house
  • constructable with the power tools I have
  • able to withstand tropical winds and rain
  • leaves and water doesn't stay collected at the top
  • ease of cleaning (such as support legs that doesn't block the broom when sweeping underneath the system)
  • pleasant to look at
I came up with a few design and performed test simulations in my head to see how they will stand up against the harshest weather in my area. Finally, the candidate that scored the best is an "arch" design made from 1/2" PVC pipe. I then did a rough sketchup model of my system with a finished shade to estimate the length of PVC pipe needed.


 The contruction of the shade was done over the course of a week during my free time. I also made some changes to the initial design by adding wider PVC pipes at the base for extra strength

Phase 1: PVC Frame

All the pipes were held together using screws. Precision, precision, precision!

Phase 2: Wire Bracing

Doing this is HELL! I have to make sure all the braces are not too loose and not too tight. Too little tension and the shade will be shaky. Too much and the pipes will have an unsightly bent. I can't remember how many times I redid all these wire bracing!

Took me 3 days to get the all the wire tension right. At the end, all the hard work... is worth it!
I used strings to pull the whole frame to the right shape before adding the wire bracing.

Phase 3: Plastic Tarp

These are greenhouse clips I made from 1/2" PVC pipe
Transparent plastic tarp that I bought from ACE hardware
Oh! Just look at that smiling kangkong! I can also hear my okras cheering... "Finally!"

Here are some closer shots of different parts of the shade:

The base of the shade is screwed to the grow bed stand.
Wires are applied here to reduce shaking
Just a simple bend is enough to secure the wire to the pipe

Two Weeks Later

After two weeks, the shade survived several stormy nights with minimal damage. During strong winds, 1 or 2 badly designed clips may pop out. I had replaced them with better clips and since then, it doesn't happen anymore. The shade shakes very little during strong winds and leaves collected at the top gets washed down by the rain.

A shot of my shaded system at the backyard
Grow bed shot. That pot of pink flowers in the middle are dianthus barbatus or "Sweet William"... My name :D
Kang kong growing vigorously without being bombarded by falling fruits from above
Standing proudly are okra plants and at the right are Genovese basil seedling that I bought from Mercato supermarket at Pavilion, KL
Tilapia tank no longer littered with leaves and fruits
Rosemary, various bok choy seedlings (2 varieties here), and japanese cucumber at the back
Beautiful kang kong leaves... Pretty flowers...
Kang kong flower up close
Kang kong fruit
Cherry tomato and "white floral spires" basil seedling. At the back, under the white container, are experimental rosemary cuttings.
Seedlings of "white floral spires" basil
This new shade is a good place to hang a Petunia plant
Unfortunately, I still have problems with rain splashing on the wall. My japanese cucumber which are planted near the wall is having problems staying upright. Their leggy stems may be due to inadequate light or too much nitrate.

"Kyuri" or japanese cucumber
Aren't their leaves a little light? Iron deficiency perhaps?
I need to think of a way to block the rain splashing.

Thanks for reading!